X-RCAM+: Double flow heat pump with plate heat exchanger for hygienic fresh air treatment
The X-RCAM+ (Recovery Clean Air Management) is a double flow heat pump with double energy recovery from the exhaust air.
It is designed to supply fresh hygienic air at neutral temperature as required by the regulations for ERP (Public Access Buildings): hotels, collective housing, hospitals and nursing Homes, as well as office buildings in compliance with the French Labour Code.
Description
The X- RCAM+ is covered by a 20-year guarantee against corrosion
The X- RCAM+ is a NEW GENERATION double flow heat pump designed to offer optimum hygienic fresh air treatment.
Thanks to its full aluminium structure (frame & casing) that ensures an excellent corrosion protection, this air-conditioning and heating system is covered by a 20-year guarantee against corrosion (frame and casing).
The X-RCAM+ operates as a reversible heat pump:
- Source: exhaust air
- Treated fluid: hygienic fresh air
The unit offers several operating modes:
- Heating mode: the extracted air transfers its heat to the fresh outside air via the plate heat exchanger (minimum efficiency 70%). If the heat demand requires it, the additional heating is carried out by the condenser of the variable capacity refrigeration circuit for optimum maintenance of the setpoint.
- Cooling mode: the heat from the fresh air is extracted and transmitted to the exhaust air via the plate heat exchanger (minimum efficiency 70%). If necessary, the evaporator of the variable capacity refrigeration circuit is used to precisely maintain the required setpoint.
- Free Cooling: cooling with outside air, without thermodynamics
In these cases, the X-RCAM+ heat pump operates in full fresh air – full extract air mode with supply air temperature control.
The ETT packaged unit consists of 3 distinct compartments :
- A technical compartment containing the refrigeration components, the electric board and the control devices.
- A supply air compartment for the renewal of fresh air
- An exhaust compartment for the recovery and/or exhaust of heat from the extract air (depending on the operating mode).
Available options
Frame – Casing
- Unit for outdoor installation
- Motorised external damper for supply air (CH38 2006/42/EC Directive)
- METU type frame
- Multiblock
Acoustics
- Acoustic insulation of the technical compartment in STOPFLAM foam
- Acoustic insulation of the fresh air cowl
Air handling
- Pressure gauge per filtration cell
- Filters fouling analogue control (FFAC)
- Actuating smoke detector with battery back-up
- ISO ePM1 80% (F9) opacimetric filters 48 mm thick on supply air side
- Spare filters
- SCP and RPC sensors
Auxiliaries
- Two-stage electric heater
- Auxiliary hot water coil with analogue frost protection thermostat
- Progressive 3-way valve for hot water coil
- Stop valve on outlet + TA regulating valve on inlet for hot water coil
- Indirect adiabatic module option
Electricity
- Unit global energy metering
- Software licence for BacNet IP protocol
- IT regime compatibility Global Machine Energy Metering
- Remote touch display ETT Control box
- MyETTvision remote communication platform
- TWIN control
Installation
- Aluminium feet 200, 400 mm
Electrics and communication
- Unit global energy metering
- Software licence for BacNet IP protocol
- IT regime compatibility Global Machine Energy Metering
- Remote touch display ETT Control box
- MyETTvision remote communication platform
- TWIN control
Warranty
- Extended warranty up to 5 years
Reinforced guards
- Hot water coil heresite coating
- Heating coils heresite coating
- High performance freewheel fans with H2+S protective coating
Download the brochure
